Biscuit making machine manufacturer today? Biscuit production line used for automatic making biscuits. Whole line including raw material handling, dough mixing, biscuit forming, biscuit baking, biscuit cooling, biscuit sandwich, and biscuit packing, etc. Available for one kind of biscuit made by using one production line, or a variety biscuit made by using one multifunctional production line. Normally can divide into 2 kinds(according to soft dough biscuit or hard dough biscuit). Specifically divided into 13 kinds(according to finished product). Discover extra info at biscuit machinery manufacturers. Apart from the integrated system hardware service, the services Golden Bake offers include all stages: from plant design, biscuit machinery construction, manufacture, and assembly up to the smooth commissioning phase at your site. Don’t be afraid to start a new project…

Adopting with pneumatic conveying system for transport powder in sealed pipe. Due to the weight measurement method, error less than 1kg. No dead angle in pipe without using screw conveyor. Adopting with pump conveying system for transport liquid in sealed pipe. Due to the weight measurement method, error less than 1kg. Avoid the error caused by the difference of material density and temperature in different batch, we don’t using flow measurement.

Due to the limitation of plant area, or the variety of goods produced.Turning machine has become an indispensable part of automatic production.But there are four problems with conventional turning conveyor. First is time of assembly. Conventional turning conveyor have complicated structure, need two workers use at least 5 hours to replace the PU belt. It need take too much time for assembly. And will waste high downtime cost. Second is maintenance cost. Conventional turning conveyor with many parts and complex structure incurs never-ending costs of replacement parts,labor and downtime. Third is hygiene & safety. The falling of worn and broken parts,lubricant infiltration etc, cold cause food pollution and safety issue. Fourth is service life. Unscientific type of drive makes PU belt stress state uneveness, which would directly shorten belt service life.

Horizontal mixing process must not develop the gluten in the flour, as this will result in a hard biscuit. Mixing is therefore done in two stages. In the first stage, all the ingredients are mixed except the flour and soda. The mixing continues until a consistent, homogenous cream is produced. It is important to keep the temperature of the dough low and chilled water is required for the mixer jacket.For the second stage,the flour and soda are added and mixed for 1minture at slow speed and 1-2minutes at high speed. The final dough temperature should be 18-22C.

General hard dough biscuit with layer texture need use the laminator. Usually laminated with four to six layers at around 4.0mm thickness. The dough is then gauged with a maximum reduction at each gauge roll. Excessive reductions of the dough thickness will prevent good lift or spring of the cracker. A relaxation conveyor is used to relax the tension in the dough sheet before cutting, as soda biscuit are subject to considerable shrinkage after cutting and during baking. Then dough sheet will be cut in any shape as customer want by using a rotary dough cutter. Read additional details on https://www.foodsmachine.net/.