Top customized led flood light manufacturer: How long do flood lights generally last? Their everyday life spans over 45000 hours of illumination. Life spans are also dependent on environmental and operating conditions. Is there any difference between IP65 and IP67 rating flood lights? IP65 rating guarantees protection against dust and water splashes, while IP67 offers water ingress protection up to 1-meter deep water immersion for 30 minutes. In a nutshell, IP65-rating flood lights are for general outdoor purposes, whereas common adversaries are dusty winds and light rainfall. IP67-rating flood lights offer superior protection against harsh weather conditions, including short-duration water immersion. Discover more details on CHZ Lighting.

Generally, more watts mean more light but with a higher electrical consumption. A vast area will require floodlight with more lumens. For example, a sports venue may need up to multiple decades of lumens, whereas a house’s backyard may need only 1,000 lumens. Color temperature – It defines the color of light emitted from a light source. It is measured in Kelvins (K). High color temperatures up to 5000-6000K give cooler bluish-white light, whereas lower temperatures (~3,000K) represent a warm yellowish light source. Here are some of the floodlight color temperatures: Warm White (2700K-3000K), Neutral White (3500K-4000K), Cool White (4500K-5000K), Daylight (5500K-6500K).

Integrated Pole Solar Street Lights – Integrated pole solar street lights are ideal for applications where a luminance of 3000-9000lm is enough to light up the street. These streetlights integrate the solar panel around the circumference of the pole. They are also called wrapped solar pole street lights. All the components of the solar street lights are inside the pole, making the overall assembly sleek and aesthetically pleasing. These lights are ideal for locations with high foot traffic or tourist attractions. However, the buyer must consider the high initial cost, as these lights come with the solar panel integrated pole, LED, control systems, and battery.

The LED tube uses a light-emitting diode as a light source, which has higher luminous efficiency, is more energy-saving, has a longer service life, and is more environmentally friendly. It is the ideal product to replace fluorescent tubes at this stage. The LED tube and the traditional fluorescent lamp are the same in the outer size. There are T5 tube, T8 tube and T10 tube. The length is 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m. The installation of the LED tube is very simple. When installing, the original fluorescent lamp is removed and replaced with the LED tube, and the ballast and the starter are removed, so that the 220V AC mains can be directly applied to the ends of the LED tube.

Our LED light fixture can be divided into indoor LED lighting and outdoor LED lighting according to the place where LED lamps are used. Indoor lighting requires high brightness, good color consistency, high color rendering, and high versatility. Outdoor lighting requires high brightness, long life, and good resistance to harsh environments. Our LED lamps feature high luminous efficiency, low energy consumption, long life, safety, and environmental protection. They can operate for more than 50,000 hours without failure, widely used in factories, warehouses, shopping malls, roads and other public places that require long-term lighting.

Flood lighting, also known as the LED spotlight and LED projection light, is controlled by built-in microchips. There are two types of chips, one is the combined power chip and the other is a single high-power chip. The former has a more stable performance, but the later has a large structure and can achieve very high power to offer long-distance and large-area illumination. LED flood light illuminates the surface higher than the surrounding. It is also known as the spotlight. Typically, the best LED flood light can be aimed in any direction and its structure is seldom affected by climates.

The solar road lighting is powered by a crystalline silicon solar cell. The maintenance-free valve-regulated sealed battery (colloidal battery) Sealed Lead Acid is exceptional in storing energy. The super bright LED lamp is used as a light source and is controlled by an intelligent charge and discharge controller, replacing the traditional utility electric lighting. Outdoor solar street lamp is to convert sunlight collected during the day into electric energy for storage, and then use the stored electric energy as LED lighting at night. Find even more info on https://www.chz-lighting.com/.

If you are struggling to differentiate street lights from other light sources, take a look at some of the features used to identify them. You need to understand that street lights are commonly made of metals such as aluminum that are corrosion resistant. Alternatively, some of these street lights are made from a strong plastic material such as polyethene. The solar street light manufacturers have been factoring in the issue of withstanding outdoor elements when looking for materials to craft these lights. Most of them are pole- mounted on either existing utility poles or dedicated poles.

Waterproof problems in the installation of LED street lights: After ensuring the quality of the lamp holder, you need to pay attention to the technical problems of the lamp holder installation and construction. Most of the led street light controllers are installed in the lampshade and battery box, and generally will not enter water, but in actual engineering cases, some are due to improper installation or The circuit board of the controller is not treated with three-proof paint, which will cause a short circuit due to rain water flowing into the led street light controller along the external wiring of the controller terminal. Therefore, during construction, attention should be paid to bending the internal connecting wires of the controller terminals into a “U” shape and fixing them, and the connecting wires exposed to the outside are also fixed to a “U” shape, so that rainwater cannot enter and cause the controller to short circuit. You can also apply waterproof glue on the inner and outer line interfaces to waterproof.

After the lighting renovation of these venues is completed, the lighting effect has been greatly improved, and it has also been highly praised by the teachers and students of the whole school. Next, the CHZ-LIGHTING team will carry out the lighting renovation work of other venues. In the field of sports lighting,CHZ-LIGHTING has accumulated rich experience in stadium lighting projects with the help of high-quality lighting products and professional service capabilities, and has created many classic project cases all over the country. In the future,CHZ-LIGHTING will continue to cultivate with a more professional attitude, constantly temper its own innovation core, and bring a new lighting experience to more stadiums and sports events by creating professional sports lighting lighting design.