How to keep your hot tub clean? Here are some advices about how to maintain your hot tub and also a recommandation if you live in Colorado. People with open sores or any type of infection should not use a spa. The hot water is the perfect environment for spreading infections, especially if sanitizer levels are not properly maintained. The same goes for rashes and other injuries. Consult a doctor to get the green light before stepping back into a hot tub. Newer spas have factory-set temperature maximums of 104 F. Most bathers find that 100 F to 102 F degrees is a comfortable and therapeutic level. Higher temperatures can place undue strain on the cardiovascular system. Be sure to accurately monitor the temperature. If you or your guests feel “funny”, lightheaded, or get overheated, step out of the tub. Check the temperature before returning and make sure you cool off and drink plenty of water.

Sometimes people lower the water temperature set point dramatically, usually to cool the water in the summer. The next thing they know, they are struggling to maintain water purity, and they think something is wrong because their spa no longer filters.

Maintaining balanced chemistry in a body of water as small as your hot tub means you’ll be changing the water frequently. You can keep recirculated dirt and debris from getting into your filter system by covering the lower return inlets with pantyhose when you change the water. Keeping that gunk out of your filter system reduces the stress on your spa’s system and helps keep it working longer. Cleaner water also means you’ll have a leg up (heh) on balancing water chemistry, too.

Advices for buying a hot tub : The size, seating and electric needs are the biggest factors in narrowing down the perfect hot tub. Consider these first. Before shopping, choose the best spot for the spa. Most hot tubs will be placed outdoors on a patio, porch or deck. Whatever spot you pick, make sure you measure before deciding on a hot tub size.

But first let’s view the hot tub choice of the month : Bullfrog Spas’ unique JetPak Therapy System lets you customize your massage with 18 options that each target a different type of massage therapy. Though most hot tubs offer some degree of customization when it comes to color options and even upgradable features, Bullfrog Spas lets you pick exactly what kind of jets and massage therapy to put in each seat. The interchangeable JetPaks, available for most models of Bullfrog Spas, give you sixteen seat back options for each seat in your spa that require less tubing and are more energy efficient than many spas on the market. Though Bullfrog does sell hot tub models without the JetPak system, the interchangeable jets and customization options are really the big selling point of this brand. Aside from the pre-set models, Bullfrog also allows you to design your own completely custom spa, as well. Find additional info at https://drspallc.com/.

The spa filter can be under the skimmer basket accessed from inside the spa, or it can be a small tank that is opened up underneath the spa. You’ll need to locate it first in order to clean or replace the filter during your spa care routine. If underneath the spa, you may have a valve that can be shut to prevent water from rushing out when you open the filter. Loosening a large nut or just turning the filter body counter clockwise is the usual method to access the filter cartridge. Some water spillage is inevitable when opening it up, but if you are careful it can be very little.

This spa care tip is so often forgotten. However, if the skimmer starts to suck air, it could possibly damage the pump. The water level should be in the middle of the skimmer intake or a little higher. You don’t want it too high, and you never want to overflow the spa, so keep a close eye on the water level while filling.

Your daily maintenance tasks are all about ensuring good water quality. In a hot tub that means checking two things: PH and sanitizer levels. This is easy stuff, and can generally be accomplished by dipping a single, color-coded test strip into the water to check that everything is as it should be. If you’re diligent about maintaining your tub, most days this won’t mean doing anything more than walking out to your tub, dipping the test stick in the water, and heading back inside. If your PH or sanitizer levels need adjusting, however, you’ll need take an extra few minutes to dump the proper additive into your water to get things back their proper levels. Doing so will prevent a host of problems, including scaling, mineral buildup, corrosion, skin irritation, and cloudy and stinky water.